使用冷干机应注意下列事宜：
Use the person who should pay attention to the following matters:
①压缩空气的流量压力、温度应在铭牌允许范围内；
(1) the flow of compressed air pressure, temperature should be in the range of allowable nameplate;
②安装地点应通风，少粉尘，机器周围有足够散热和检修空间且不能在室外安装，以避免雨水及阳光直射；
(2) the installation location should be ventilated, less dust, the machine has enough heat and maintenance space around and cannot be installed outdoors, to avoid the rain and sun;
③
冷干机一般允许无基础安装，但地面必须找平；
(3) person who generally allow no base installation, but must ground leveling;
④应尽量靠近用户点，避免管线过长；
(4) should be close to the user points, as far as possible to avoid the pipe is too long;
⑤周围环境中不应有可检测到的腐蚀性气体，尤其注意不能与氨制冷设备共处一室；
(5) should not be in the surrounding environment can be detected by corrosive gas, especially pay attention to cannot coexist one room with ammonia refrigeration devices;
⑥冷干机前置过滤器的过滤精度要适当，过高精度对冷干机并无必要；
Those person who must be properly pre filter filtration precision, high accuracy, with no need for person;
⑦冷却水进出管要独立设置，尤其是出水管不可与其他水冷设备共用，避免压差引起排水受阻；
All landowners of cooling water in and out of the tube to independent setting, especially the outlet pipe is Shared with other water cooling equipment, avoid pressure difference causes drain is blocked;
⑧任何时间都要保持自动排水器排水畅通；
Any time today to keep clear of automatic drainer drainage;
⑨不要连续启动冷干机；
Pet-name ruby do not consecutive start person;
⑩冷干机实际处理压缩空气的参量指标，特别是进气温度、工作压力与额定值不符时，要按样本提供的“修正系数”进行修正，以避免出现超负荷运行。
Attending person who actually handle the parameter index of compressed air, especially the inlet temperature, the working pressure is not in conformity with rating, according to a sample provided by the correction coefficient modification, to avoid overload operation.
